Download the Samsung Galaxy Firmware for your smartphone. Samsung Galaxy smartphones are not like other smartphones, you need to know many things about the phone. It includes the Model, Baseband, PDA, CSC, and Country. Flashing the wrong firmware can damage your phone. Download Samsung Galaxy SL GT-I9003 Firmware from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, flash tool and the Firmware file.

Since there is no guide for flashing the Samsung galaxy S gt i9003 I have thought to make a thread on it so here it goes 1. Download and run odin. Check Re-Partition, Auto Reboot and F.

Click PIT button and select this file: latona_20110114.pit 4. Put your phone into download mode: Press Volume down + OK + Power. Connect USB cable and the program will detect the phone's Com number. Click Start button to download the PIT file to phone. After it is Done Click on Reset button, then unselect Re-Partition box.

Click PDA button and select this file: I9003xxxxx-xxx.-PDA-low-CL890053.tar.md5 9. Rpg maker vx ace free download. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5 10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5 11. Remove the battery, then enter Device into Download Mode again. Click Start button to flash these files to phone. Do not touch anything till you see PASS on the program window.

Just do a factory reset after flashing using recovery DOWNLOAD THE FIRMWARES FROM THIS THREAD: IF there is only a file of the f.w i.e. Pda file then do NOT use a pit file for flashing just select the pda and flash it I have also attached the Odin and.pit file for download Enjoy flashing and do at your own risk.